MOPAR 360 BASED 408 ENGINE ASSEMBLY H PERF HI QUALITY BUILD CUSTOM

Description

PLEASE READ ENTIRE AD
Now for your hot rodding pleasure we have mopar 408 crate engine builds for your mopar musclecar, truck or street rod.  These are built on quality castings that have been cleaned, inspected, pressure tested.   All blocks are checked for any damage, and then bored with appropriate torque plate,  Crank saddle checked and line bored if necessary. Then after thorough washing block is painted customer requested color, new cam bearings installed, new freeze plugs and screw in pipe plugs installed
*Block is assembled with all new Clevite or King bearings and crank goes in for initial fitting
*After trial fit passes , crank is installed with new Fel pro rear main seal & ARP main bolts
*All new Scat rods and KB pistons with valve reliefs for hi lift cam and advertised 10-1 comp w/ full floating pins &  spirolox
*Each rod and piston is trial fitted to ensure perfect fit
*New Hastings Moly ring set- top ring fitted appropriately for HP piston with extended gap for piston expansion
*all new Clevite or King bearings for connecting rods with ARP with cap screws
*new stroker windage tray and hardware- not shown
*all new HV72 Melling pump and new pick up appropriately picked for matching pan
*all new oil pan and Fel Pro gasket /seal set
*Comp XE-20-227-4 275/287 dur. and .525 lift - choppy idle but enough vacuum for power brakes(other cams available
*Cloyes tru roller timing set and new cam bolt and washer
*chrome fuel pump block off
*reconditioned timing cover
*new HP SFI balancer for internal balance (this kit now makes the engine internal balance)
*new Edelbrock 60179 heads 65cc 2.02 int/1.60 exh- all corrections done to valve guides and seats
*ARP head stud kit
*new rocker arms set for hydraulic cam- adjustable 1.5
*Fel Pro Head gaskets
*Comp Chromoly push rods
*Edelbrock Rpm intake/ Torker 2 or Weiand Stealth
*new Holley brawler 700/750 dp carb and chrome dual feed line
*all new grade 8 hardware
*new billet distributor
*chrome distributor hold down
*new water pump hd 5/8" shaft
*8mm spiral core wires in blue/black/red
*NGK FR4 plugs
*engine tested on our PRW top of the line run module, double checked for integrity
*options include to add:
*Cvf racing billet pulley/ bracket sets- inquire$- see last photo
*solid cam 199
*Comp or Hughes roller cam set up 995
*Holley Sniper fuel injection master kit 1499
*header kits from 240-up
*6 pack setup 3500
and more....these are just some examples
THESE ARE NOT READY MADE AND ARE CUSTOM BUILT TO ORDER- we have no idea what you want so it is impossible to have one ready to ship right away
12mo 12k warranty on parts and materials under normal circumstances
ONLY PAY A 0 Crating fee- free promo shipping to a business!
Turnaround time is about 10-12 weeks, depending on how busy we are, and we don't have a core charge.   All orders are sent LTL freight to a business with an average fee of 5 for shipping/ crating
and much more.....if interested please contact us and we can discuss your build. Payment is thru ebay checkout via MC Visa or Discover merchant card.   36 years in the MOPAR business building FAST cars......  Thank you!   Driveline Works